|
|
|
|
|
Our Current Inventory:
(2) 5x4 KSJF - 500 GPM @ 42 PSI
Click here to
Download a Dimensional Drawing
Click here to
Download a Performance Curve
|
|
 |
8100 Series - Horizontal Split Case
-
Capacity to 3000 GPM
(11,355 L / min.)
-
Pressures to 255 PSI
(179 m)
-
Working pressures up to
125 PSI with 125 lb. A.S.A. flanges
-
Working pressures up to
250 PSI with 250 lb. A.S.A. flanges
|
-
Space saving design
-
Available in horizontal
and vertical configurations
-
Suction and discharge
flanges are on a common centerline
-
Bearing span is kept to
a minimum
-
Available in electric
motor driven or diesel engine driven configurations
-
Available in clockwise
or counter-clockwise rotation to simplify pump room layout
Click here to
Download Installation Instructions
|
|
|
1580 Series - In Line
-
Capacity to 1500 GPM
(1,784 L / min.)
-
Pressures to 165 PSI
(116 m)
-
Working pressures up to
150 PSI
|
- 10 Pipe diameters of straight
suction pipe is not required
- Space saving design
- No foundation or pads required
- Suction and discharge flanges are
on a common centerline, 180° apart for inline mounting in piping
- Top pull out design allows for fast
and easy servicing
- The rotating element is easily
removed without disturbing suction and discharge piping
- Self-venting design eliminates the
need for an automatic air release valve
- Bronze impeller is dynamically
balanced and keyed directly to the motor shaft
- Only one stuffing box cuts down on
leakage
Click here to
Download Installation Instructions
|
|
 |
2000 Series - End Suction
-
Capacity to 500 GPM
(892 L / min.)
-
Pressures to 150 PSI
(106 m)
-
Working pressures up to
250 PSI
|
- Top centerline discharge with foot
supported casing
- Self-venting design eliminates the
need for automatic an air release valve
- Rear pullout design eliminates
disturbing the driver or the piping when removing the rotating element
- Hydraulically balanced impeller
extends bearing life and assures smoother operation
- Available in electric motor or
diesel engine driven configurations
Click here to
Download Installation Instructions
|
|
 |
FP Series -
Vertical Turbine
-
Capacity to 5000 GPM
(8,920 L / min.)
-
Pressures to 500 PSI
(353 m)
-
Working pressures up to
250 PSI
|
- Space saving design
- Submerged impeller that require no
priming
- Product Lubricated bearings up to
50 ft. of column pipe
- The column length can be varied
adapting the pump to different water levels
- Low maintenance
- Weight of all rotating elements,
including axial thrust, is supported by a single thrust bearing at the top
of the driver
- Only one stuffing box cuts down on
leakage
Click
here to Download Installation Instructions
|
